Thursday, January 6, 2011

Make Your Own Scrappy Belt

Matching your outfit perfectly, laying smoothly, moving with you instead of holding you back or cutting into your abdomen... all great reasons to make your own belt. It's also easy to do and fun fun fun!




You Will Need:
  • Various fabric scraps
  • A Belt Buckle (you can either scavenge one from an old belt or buy one at your local sewing store)
  • Optional: Grommets 
I chose my fabric colors to go with the clothing I normally wear. The scraps I'm using are upholstery samples. If you use regular cotton, you may choose to add interfacing for a little more stiffness (but I've gone without before and it worked just fine).



1.) First Cut your scraps into pieces the same width, but in various lengths. I cut mine 5 inches wide and the lengths were around 2-6 inches.





2.) Sew your pieces together at the ends making one long piece. Just remember that you will lose length when you sew them together so you will need extra to cover that plus 2 inches. Use an existing belt to help you decide length if you can. 






3.) Sew down the length of the piece forming a tube. Then turn right-side out.




4.) Press flat, turning the raw ends in.





5.) If you would like a pointed tip, fold in the sides and press again.








6.) Top Stitch around the edge about 1/8 of an inch from the edge.





7.) Figure out where you want your holes. You can use grommets if you want, but I just make button holes.








8.) Make another small button hole 1/2 inch from the other end for your buckle.






9.) Insert the post, fold over the end, and stitch down.





You're ready to step out in style!











And here's one I made with regular cotton scraps:

Wednesday, January 5, 2011

Egg Carton Fire-Starters

OK so this really doesn't fall into the crafty category... so sue me.

It's the time of year our wood stove is making the Michigan Winter a little more cozy and, let me tell you, getting that fire started some days is like pulling teeth...without anesthetic...and rusty a rusty pair of pliers. To make this task easier, I was told to make egg carton fire-starters.


They. Are. Awesome!

So, if you have a fireplace, like to go camping, or know someone this might make a fun gift for...

You Will Need:
  • Recycled Material Egg Carton(not Styrofoam)
  • Dryer Lint (you read that right)
  • Cotton String
  • Wax (old candles work well)


First, get your wax melting. You can place it in a sealed baggie in a pan of water heating on the stove or in a glass measuring cup in a pan.


Egg cartons are a little awkward to cut and I found a box cutter to simplify things. I cut the carton into strips of cups (otherwise they won't stand up) and placed them on an old cookie sheet. Then I put a piece of the cotton string in each one.





A piece of dryer lint goes on top...




When the wax is melted, pour a little in each cup, wetting the lint. If you want a more pleasant look you may also put a pine cone in the cup at this point.


Let the wax cool and you have your fire-starter.

Thursday, December 30, 2010

A Super Last Minute New Year's Eve Decor- Another Disco Ball

I really had no plan of making this little ditty, but I saw shiny foil cupcake wrappers and as I find myself influenced by Aunt Peaches creative uses for culinary accessories, I was sold.



So to start with, I bought 3 containers of the cupcake wrappers and it ended up being just enough.

P.S. You get double the papers since there is a white liner between the foil ones...just look at the pile of crafting fodder I have left! Maybe I'll have to make a Lotus Blossom Ball like Aunt Peaches' in the link above.


You'll need:
  • Some kind of large ball, I used a paper lantern from Halloween (Dollar Store item!)
  • Foil Cupcake Wrappers 
  • Hot Glue and Gun



1) Begin by gluing the  wrappers onto the ball. **Remember that foil heats very well so be careful.







2.) When the ball is covered, you will glue another wrapper inside the ones already attached. First squish it a little...

...then glue it into the center of a wrapper.
I don't know if you can tell what you're looking at, but take a look at the wrappers below and you'll see the difference.


That's really it. Just hang it in a spot where it will catch the light and you will have a beautiful party decoration.




Wednesday, December 29, 2010

Excited about new (to me) patterns!

I'm so geeked to have found four patterns at Goodwill today! Three of them are retro (70's and 80's) and one is from this century...albeit eight years ago.







I'm thinking a jacket with this one...






And I think this calls for a dress and a shirt...



This dress is just gorgeous...



And I love the tops with the cinched waist (E and D)...



This should be fun!

Sunday, December 26, 2010

New Year's Eve Disco Ball- Party Favor (Kid Friendly) Craft

Ahhh New Year's Eve... proof that there really is something even gaudier than Christmas decorations (I say this with a great deal of fondness). Christmas may have the childlike, multicolored, cuteness, but New Year's Eve? Well NYE has all the spangle and sparkle of a Vegas Show Girl's undies.

In that vein, what could be more fun than a mini disco ball as you watch that famed ball drop? This would also work for a kid or tween's themed party.






For this you will need:



  • Styrofoam Craft Balls (I used 3 in)
  • A Bag O' Sequins (for a traditional disco ball look, you can use all silver)
  • Silver Straight Pins
  • Ribbon


First, I used a little hot glue to attach the ends of my ribbon to the Styrofoam ball.





For added strength, I started pinning sequins right on top of the ribbon.



Continue pinning the sequins to cover the ball surface.







(Fairly) Soon, you will have a little disco ball, ready for the dance party!  5...4...3...2...


Happy New Year!


Thursday, December 23, 2010

Business in the Front, Party in the Back: Making a Halter Vest

On the same thrifty trip as the Plaid Skirt, I also scored a pretty awesome tweed vest.
Check out the velvet accents at the collar and pockets


In the back, I cut a little above the bottom of the arm hole. Then again, beginning at the shoulder/arm hole and around the back-under the collar.


I finished the raw edges with a little stitching and a zig-zag.




 



Under the collar, I folded the edge in and stitched it down.



For the new back edge, I pressed a fold...

...then stitched elastic down just below the fold line.



I folded the edge over the elastic (pulling it tight), and stitched it down.


There it is. A Halter Vest.

Business in the front...

...party in the back.